Split-core Current Transformer

An introduction to the current transformer. Structure adopts high strength PVC case, pouring and busbar structure. Transformer three character card on the cable directly hold onto the cable and cable with rubber ring. Transformer core is made of high quality rolled silicon steel sheet, and the secondary conductor uniform winding on the iron core. Transformer is a well-formed structure can not cut off the cable for installation.

Second, the scope (if you want to order products suitable for outside the range of the following may be negotiated with me)

Installation location of altitude does not exceed 3000 m;

Ambient temperature: - 25 + 40 ℃;

To wear a cable diameter: 8 - phi phi is 240 mm

Input: 0 ~ 60 ka

Output: 0 ~ 500 ma 1 a or 5 a 5 VDC or 4 ~ 20 ma defined (client)

Atmosphere without serious impact on pollution and erosion of transformer insulation performance and explosive media.

Rated input current: 0.01 A - 400 - A

Core material: ferrite

Mechanical strength: opening and closing times no less than 1000 times

The flame retardant properties: accord with UL94 - VO