Conditi Of Control Transformeron Analysis Of Control Transformer

Condition  of control transformeron analysis of control transformer

Do you know what conditions you need to meet before you can use this product correctly? If you don't know this, here's how you can make the product more powerful when you use it.

1. Ambient temperature

Use control transformer This product environment to maintain within - 5 ~ 40 degrees of normal operating environment, when you exceed this set of environmental conditions will make all aspects of the product because of the temperature is too high and too low caused by the performance and life of the decline. It is recommended that each customer using the control transformer use this product to keep the temperature below 35 degrees a day - more than 5 degrees is the best state of the product.

2. Altitude

The altitude of the control transformer is generally below 2000 m. When you use the control transformer in the environment of more than 2000 m, the performance and life of the equipment will be reduced and the safety of the operator will be maintained.

If you're in a particular environment like this, you can negotiate with the transformer manufacturer to produce a device specifically designed for you that will work in this particular environment.

3. Moisture concentration

The humidity concentration can be changed according to the temperature of the environment. For example, using this product at 40 degrees does not affect the equipment, and the humidity concentration in the air needs to be increased as the temperature decreases. Highest humidity levels above 90% will cause a high degree of damage to the parts caused by condensation in the equipment during operation. It is recommended that some customers who cannot replace the environment use dehumidifiers to reduce the humidity in the air so that your equipment is in the best condition.

4. Temperature change

A large temperature change in the environment will have a great impact on the equipment, such as - 5 temperature suddenly increased to 40 degrees, such an environment is absolutely not because the environmental temperature change will cause the control transformer surface frost phenomenon, and long-term let a device be frost erosion will make parts list. The surface will rust and reduce the intensity.

If you are in this particular environment and control transformer manufacturers to negotiate the replacement of products or change the use of the environment can be resolved.

5. No corrosive, large amount of dust or other dangerous gases can occur in the environment where the control transformer is used. If you use the control transformer for a long time in this environment, it will corrode all aspects of the product and lead to performance degradation or inability to operate. Dust is common but only necessary. Daily maintenance doesn't have too many problems if excessive dust can cause the equipment to become unusable or degrade performance during operation because of dust entry.

Do you use the control transformer's environment to meet the above requirements? If you come up with a conformance phenomenon, use another device or specially produce a device that conforms to the environment, do not attempt to use a general control transformer in such an environment.