Common mode choke coils with EE16 bobbin, without ferrite core comply with RoHS Directive-compliant

Electrical characteristics (temperature: 25+5°C: 65+5 RH):

• Inductance at 1kHz, 0.1V, L (4-3): 10mH minimum L (8-7): 200uH minimum

• L (2-1): 32uH minimum  L (5-6): 32uH minimum

• DC resistance DCR (4-3): 660mΩ maximum DCR (8-7): 12mΩ maximum

• DCR (2-1): 48mΩ maximum DCR (5-6): 48mΩ maximum

• Hi-pot (50Hz) N2 TO (N1, N3, N4): 3kV AC, 3mA, 1 minute

Applications:

• Heat rated current (Irms) will cause coil temperature rise approximately at of 40°C (keep 1 minute)

• Storage conditions

• To maintain the solder ability of terminal electrodes:

• Taipaq products meet IPC/JEDEC J-STD-020D standard-MSL, level 1

• Temperature and humidity conditions: less than 40°C and 60% RH

• Recommended products should be used within 12 months form time of delivery

• Packing material should be kept where no chlorine or sulfur exists in the air

Transportation:

• Products should be handled with care to avoid damage or contamination from perspiration and skin oils

• Use of tweezers or vacuum pick up is strongly recommended for individual components

• Bulk handling should ensure that abrasion and mechanical shock are minimized